Boom Barrier

Product Details:

 boom barrier, also known as a boom gate, is a bar, or pole pivoted to allow the boom to block vehicular or pedestrian access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped.

Product Details:

 boom barrier, also known as a boom gate, is a bar, or pole pivoted to allow the boom to block vehicular or pedestrian access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped.

Product Details:

TECHNICAL SPECIFICATIONS

• Maximum length of Boom : 6m
• Boom Rest Stand :Yes
• Arm material : Aluminum
• Time for Up/down : 6s
• Input control signal : Dry contact
• Ingress protection Degree : IP54
• Input Interface for : 1. Photocell ,2. Air switch ,3. Loop detector.
• Output interface : lamp
• Optional Interface : Access control panel, Stand alone access control,Control button
• Remote control : Yes,upto 25 meters
• Mode : Automatic/Manual
• Incorporated control panel with 3 push buttons (STOP/UP/Down) to control the motor Bumping bounce back : Optional
• Auto closing time : 1-80s

POWER SUPPLY

• SMPS - Input : AC 220V / 110V, 50Hz / 60Hz
• Motor power : 90W, 220V AC
• Dimension(mm) : 268 X 348 X 1050
• operating temprature : -20??C ~ +50??C

FEATURES

• Can control by three position switch or by remote control unit, operate ‘OPEN’, ‘CLOSE’ and ‘STOP’
• Machine core with compression spring, effectively avoids the accidents caused by spring breaking.
• Motor cooling fan, solving the problem of heat-protection.
• Double safety limit switches (Optional)
• Auto Close function.
• Manual Release
• Duty Cycle 100%
• Support the external and internal Loop Detector (Optional)
• Traffic Light interface. (Optional)
• Wire control (switch signal)\ Remote control ( upto25m)
• Compatible with Weigand and RFID Readers.
• Compatible with bio-metric
• Die-casting aluminum alloy motor, precision and good at thermal radiating
• Support the infrared photocell for anti-bumping function (optional)

Product Details:

TECHNICAL SPECIFICATIONS

• Maximum length of Boom : 8m
• Boom Rest Stand :Yes
• Arm material : Aluminum
• Time for Up/down : 8s
• Input control signal : Dry contact
• Ingress protection Degree : IP54
• Input Interface for : 1. Photocell ,2. Air switch ,3. Loop detector(Optional).
• Optional Interface : Access control panel, Stand alone access control,Control button
• Remote control : Yes,upto 25 meters
• Mode : Automatic/Manual
• Incorporated control panel with 3 push buttons (STOP/UP/Down) to control the motor Bumping bounce back : Optional
• Auto closing time : 1-80s

POWER SUPPLY

• SMPS - Input : AC 220V / 110V, 50Hz / 60Hz
• Motor power : 90W, 220V AC
• Dimension(mm) : 268 X 348 X 1050
• operating temprature :-20??C ~ +50??C